Mobile Net Connect » O2

GPRS Settings (APN,Username,SMTP,DNS) For Different Mobile Carriers

freelance — Wed, 25 Nov 2009 15:21:03 +0000

	Network	APN	User Name/ Password	DNS	SMTP Server	Notes
UK	3	three.co.uk	guest/guest	-	[don't know]	-
UK	AirTel Vodafone	airtel-ci-gprs.com	guest/guest	-	[don't know]	-
UK	Jersey	pepper	abc/abc	212.9.0.135	mail.jtfrees urf.co.uk	-
	Telecom			212.9.0.136
UK	3 (broa dband)	3internet	guest/guest	171.31.140.69	smtp-mbb. three. co.uk	-
				171.30.140.69
UK	O2 (contract)	mobile.o2. co.uk	faster/web	193.113.200.200	smtp.o2.co.uk
	(optimised)			193.113.200.201
UK	O2 (contract)	mobile.o2. co.uk	bypass/web	193.113.200.200	smtp.o2.co.uk
	(non-optimised)			193.113.200.201
UK	O2 (pre-pay)	payandgo.o2. co.uk	payandgo/ payandgo	193.113.200.200	[don't know]	Must use proxy:
				193.113.200.201		193.113. 200.195
						port 808
UK	Orange	orangeinternet	orange/ multimedia	158.43.192.1	smtp.orange .net	-
	(Pay Monthly)			158.43.128.1
UK	Orange	orangeinternet	user/pass	193.35.133.10	smtp.orange .net	-
	(Pay as you go)			193.35.134.10
UK	Orange	orangeinternet	wap/wap	193.35.133.10	smtp.orange .net	-
	(Just Talk)			193.35.134.10
UK	T-Mobile	general.t-mobile.uk	user/pass	149.254.201.126	smtp.t-email.co.uk	-
				149.254.192.126
UK	Tesco Mobile	prepay.tesco-mobile.com	tescowap/ password	193.113.200.195	[don't know]	Supports WAP only
UK	Virgin Mobile	goto.virgin mobile.uk	user/[space]	-	[don't know]	-
UK	Vodafone	internet	web/web	10.206.65.68	send.vodafone .net	-
	(contract)			10.203.65.68
UK	Vodafone	pp.vodafon e.co.uk	wap/wap	10.206.65.68	send.vodafone .net	-
	(pre-pay)			10.203.65.68
USA	AT&T	ISP.CINGULAR	ISPDA@/ CINGULAR1	66.209.10.201	cwmx.com
	(With acceler ation)		CINGULARGPRS/ CINGULAR1	66.209.10.202
			.COM/ CINGULAR1
USA	AT&T	ISP.CINGULAR	ISP@/ CINGULAR1	66.102.163.231	cwmx.com
	(NO acceler ation)		CINGULARGPRS/ CINGULAR1	66.102.163.232
			.COM/CINGULAR1
USA	AT&T	WAP.CINGULAR	WAP@/ CINGULAR1	68.105.28.11	cwmx.com
	(non- contract)		CINGULARGPRS/ CINGULAR1	68.105.29.11
			.COM/ CINGULAR1
USA	Edge Wireless	ISP	guest/guest	-	[don't know]	-
USA	T-Mobile (Internet)	internet2.voice stream.com	guest/guest	66.94.9.120	myemail.t-mobile.com
				66.94.25.120		Web Proxy:
						216.155. 175.188
						port 8080
USA	T-Mobile (VPN)	internet3.voice stream.com	guest/guest	66.94.25.120	myemail.t-mobile.com
				66.94.9.120		Web Proxy:
						216.155. 175.188
						port 8080
USA	T-Mobile (non-contract)	wap.voice stream.com	guest/guest	66.94.9.120	myemail.t-mobile.com
				66.94.25.120		Must use Web proxy
						216.155. 165.50
						port 8080

O2 XDA II Mini PDA – Setting up o2 WAP

freelance — Sun, 15 Nov 2009 20:43:05 +0000

Setting up o2 WAP on a Pocket PC

This section explains how to connect to WAP via UK operator O2 online . To get WAP access with o2, you need the following:

1. An O2 online SIM card (which gives you free text messages and an inclusive GPRS WAP allowance)

2. A mobile phone with a modem (such as a Nokia 6600), or a standard modem connected by some other means (cable or Bluetooth) to the Pocket PC

3. A Pocket PC Wap browser. Pocket Explorer is fine for the job, but if you’re looking for a different WAP browser, other browsers are available.

O2 Wap (Mobile Internet) settings:
Homepage: http://wap.o2.co.uk/
Dialup access number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 9201

This page offers help with Pocket PC 2002 and Windows Mobile 2003 devices. As the process differs slightly between the two systems, we have two separate sets of instructions: Pocket PC 2002 and Windows Mobile 2003. To check which system you have, go to: Start > ‘Settings’ > ‘System’ tab > ‘About’.

Step-by-Step setup instructions (Pocket PC 2002)

The following applies to devices with the Pocket PC 2002 operating system – See below for Windows Mobile 2003 instructions

Setting up the WAP dialup connection:

1. Go to Start > Settings > Connections tab> Connections.

2. From the “When needed, automatically connect to the Internet” pulldown, select the “New…” option.

3. Enter “o2 WAP” as the Connection name, then select the ‘Modem’ tab.

4. Press ‘New’. You will be presented with the “Make new connection” screen. Complete the details as per the following screenshot – We’re assuming that you’re connecting between your Pocket PC and a modem over infrared (IrDa):

5. Press ‘Next’ and enter the number “+447712927927″ in the ‘Phone number’ field, as per the following screenshot:

6. Press ‘Next’. At the next screen, untick the “wait for dial tone before dialling”, then ‘Finish’.

7. Go to the ‘Proxy Settings’ tab, and tick ‘This network connects to the Internet’ and ‘This network uses a proxy server’. Enter the proxy server as “193.113.200.195″, as per the following screenshot:

8. Press ‘Advanced’ and in ‘Wap’, enter the server address as “193.113.200.195″ and the ‘Wap’ port number of “9201″, as per the following screenshot:

9. Close the dialog with the ‘OK’ button and close the ‘My connection’ page with the ‘ok’ button.

10. You now need to double-check that your area code information is correctly set. Press the ‘Dialing Locations’ tab.

11. Under the location field, press the ‘New’ button and enter the name “Mobile”, and press ‘OK’

12. Now enter your ‘Local Settings’ Area code and Country code.

13. Now, press the ‘Dialing patterns…’ button, and make sure that you’re not dialling using a country code or an area code. All you need is a “g”, meaning just dial the number without an area code. The dialog should look as per the following screenshot:

14. Close the ‘Dialing patterns’ dialog with the ‘OK’ button and close the ‘Connections’ page with the ‘ok’ button.

You should now be ready to connect to WAP from your Pocket PC 2002 device.

Go to Internet Explorer and in the address bar, type “http://wap.o2.co.uk/” and press Return. Your Pocket PC will attempt to connect with the modem and dial the Internet.
When you first try to connect to o2, you’ll be prompted to enter a enter the username of “o2wap”, the password as “password” and check “Save password”, as per the following screenshot:

Step-by-Step setup instructions (Windows Mobile 2003)

The following applies to devices with the Pocket PC 2003 operating system – See above for Pocket PC 2002 instructions

Setting up the WAP dialup connection:

1. Go to Start > Settings, go to the ‘Connections’ tab, and select ‘Connections’

2. Go to the ‘Advanced’ tab and press the ‘Select Networks’ button.

3. You should now be at the ‘Network Management’ screen. Under the first pulldown, press the ‘New…’ button.

4. On the ‘General’ tab, enter the name “o2 WAP”.

5. Go to the ‘Modem’ tab and press the ‘New…’ button

6. Enter “o2 WAP” and select the modem as “Generic IrDA”, then press ‘Next’

7. Enter the o2 WAP dialup number, which is 07712 927927 in the ‘Phone number’ field, and then press ‘Next’

8. Enter the username of “o2wap” and the password as “password” , and then press ‘Finish’

9. Select the ‘Proxy Settings’ tab and tick ‘This network connects to the Internet’ and ‘This network uses a proxy server’. Enter the proxy server as “193.113.200.195″, as per the following screenshot:

10. Press ‘Advanced…’ and in ‘WAP’, enter the server address as “193.113.200.195″ and the ‘WAP’ port number of “9201″, as per the following screenshot. (If using o2 GPRS, the port number is 8080):

11. Press ‘OK’ to close the Advanced dialog, “OK” again to save the settings, close the ‘Network Management’ dialog with the ‘OK’ button, and press ‘OK’ a final time to exit ‘Connections’.

You should now be ready to connect to WAP. With your modem connection ready (IR enabled and lined up), go to Internet Explorer and in the address bar, type “http://wap.o2.co.uk/” and press Return. Your Pocket PC will attempt to connect with the modem and dial the Internet.

Sony Ericsson m600i – mac OS

freelance — Thu, 14 Aug 2008 19:06:10 +0000

Basically, plug the phone in using a USB cable. and run wvdialconf with root priviledges (sudo)
Then edit the resulting /etc/wvdial.conf to add the missing parts, so it looks something like this:

Code:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","internet.tele2.se"
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Phone = *99***1#
Password = pass
Username = name

I had to add the Init3 thing and phone number (*99***#), and add dummy pass/name, as wvdial wants them.
Then start Internet with

Code:

wvdial

and I was connected!

…and once this was done, setting the phone up to use Bluetooth was also a breeze.
Following the advice regarding Installing Bluetooth and dialup packages and Configuring the rfcomm device found at https://help.ubuntu.com/community/BluetoothDialup, all I had to do was to make a copy of the /etc/wvdial.conf above (named it /etc/wvbt.conf), change the Modem line from

Code:

Modem = /dev/ttyACM0

Code:

Modem = /dev/rfcomm0

and then use this connection with

Code:

wvdial -C /etc/wvbt.conf