MOTOROLA V6 RAZR MAXX

The first thing you need to do is get your phone connected. Here’s a great guide that takes you through the process:

1. With the phone plugged directly into your computer NOT through a USB hub: On your computer, go to control panel>system>device manager>hardware.  Open the entry entitled modems.  Do you see an entry of “Motorola USB Modem”?
2. If that entry is there, right click on it and select “properties”.  Look in the “Device Status” box and if installed properly, you should see “This device is working properly.  If you are having problems with this device, click Troubleshoot to start the troubleshooter”.  If not installed properly, click on the “Driver” tab at the top of the window.
3. Now Click Update
4. click the “no, not at this time” radio button
5. click next
6. click “install from a list or specific location (Advanced)” radio button and ,a search and installation window will open
7. click “include this location in the search radio button
8. Browse to the folder that contains the P2k drivers
9. Click Next.  The system will take a couple of seconds to look for the drivers in the location you chose.  Then, it will probably ask you to point to the P2K.sys file so browse to the location of that file (wherever the P2K drivers are located on your computer, usually in a sub directory to P2KCommander/p2kdrivers_2.9 or P2K Manager/drv) and click on it. You’ll have to point to P2K.sys file 4 times–1 each for:

• Motorola Accessories (Loaded via MPT)
• Accessories Interface
• Data Logger MCU Interface, and
• Test Command Interface.

First, make sure your phone is not plugged in. The only thing you’ll need to download is this zip which contains a batch file to show all of the devices (Connected or Not) in the device manager.

1. Once you double click the batch file you should be presented with a window.
2. Now you need to click on “show hidden devices” in the View menu.
3. You should notice that the List has updated and probably contains more entries now.

Congratulations!  Your P2k drivers are now installed and you should be able to successfully connect your handset to begin your modding operations.

Now, to test the connection:

1.  Make sure your phone is connected to the computer vie data cable
2. Open P2K Commander
3. Click the “Options” Menu item
4. Make sure the slider (Number of files to load) is positioned completely to the right for “Unlimited”
5. In the “Select a phone’s drives partitions” box, make sure the a/ radio button is selected
6. Click OK
7. In the right drive selection window (assuming the right window shows the phone) click the down arrow and select P2K Mobile Phones
8. If connected properly, that selection will now be visible in the window and all of the the phone’s directories should be read.  If they are not, click the “Re-read” button.