This post describes how to use your Bluetooth- and Airport-enabled Mac with your Bluetooth-enabled Sprint PCS phone to set up a mobile wifi access point. Meaning, you can put your iBook in your car or backpack, put your phone in your pocket, and give free wifi internet access to anyone who happens to be in the area. (Of course, you will also be able to access the internet yourself all the while.)
These instructions assume you are using Mac OS X 10.4 (Tiger), and a Samsung A920, the official phone of Sprint Ambassadors everywhere. But they should apply to any Sprint phone with Bluetooth that is capable of being a data modem and/or using their Power Vision service. Non-ambassadors will have to navigate the labyrinth of Sprint customer service and get “phone-as-modem” service added to their plan. Once you’ve gotten that taken care of, please continue…
Summary for experienced people
Details are below, but if you know what you’re doing and just want to do it quickly:
1. Turn on Bluetooth on your phone.
2. Pair your phone with your Mac.
3. In the PPP configuration for Bluetooth in Network preferences, leave the username and password blank and use this phone number: #777
4. In Sharing preferences, go to the Internet pane and turn on Internet Connection Sharing for Bluetooth, allowing AirPort devices to connect.
5. Back in PPP, click “Dial Now…”. You should be all set. By default, your SSID will be your computer’s name.
6. If you need a detailed step-by-step, continue reading…
First, set up the phone
1. Press “Menu/OK”.
2. Select “Settings”.
3. Scroll down and select “Bluetooth” and press OK.
4. If Bluetooth is disabled, click OK on to enable it.
5. Set “Visibility” to “Always visible”. (This is optional and not very secure, but it might make things easier later.)
6. Select “Device Name” and enter a nice name for your phone. This is the name other Bluetooth devices (like your Mac) will display when connecting to your phone. (I have found in other contexts that choosing a one-word name can reduce errors.)
Connect your Mac to your phone via Bluetooth
1. Open System Preferences.
2. In the Hardware section, click Bluetooth.
3. In the Settings pane, make sure it says Bluetooth is on. Other than that, it doesn’t matter much what is selected.
4. In the Devices pane [screenshot], click “Setup New Device”.
5. The Bluetooth Setup Assistant wizard will start. Click “Continue” and select “Mobile phone” from the list of device types.
6. The wizard will scan the airwaves looking for Bluetooth devices. When you see the name of your phone, select it and click “Continue”.
7. After a few seconds of “gathering information,” the wizard will prompt you to click “Continue” to continue. Do so.
8. Your computer will display a “passkey”, a number you have to type into your phone to “pair” the phone with your Mac. [screenshot]
9. Your phone will prompt you to accept the pair. Press “Accept”.
10. Enter the passkey into your phone and press OK. If you wait too long, the connection will time out, and you’ll probably have to go back in the wizard and get a new passkey.
11. Once the pairing has taken place, click “Continue” to continue.
12. Make sure “Access the internet with your phone’s data connection” is checked.
13. Click “Continue”.
14. Here’s the important part: You will be prompted to enter connection settings. Leave “Username” and “Password” blank. In “Phone Number”, enter #777. For “Modem Script”, select “Sprint PCS Vision”. [screenshot]
15. Optionally, select the checkboxes to show Bluetooth and Modem status in the menu bar.
16. Click “Continue”.
17. Click “Quit”.
Connect to the Internet
At this point, you might want to turn off Airport and/or unplug your network cable, so that when you connect to the internet via the phone, you’ll be sure you are connected via the phone. (After it’s all set up, you can turn Airport back on.) In the meantime, here’s how to get connected:
1. Open System Preferences. (Or click “Show All” if your Bluetooth panel is still active.)
2. In the Network & Internet section, choose “Network”.
3. In the dropdown labeled “Show”, select “Bluetooth”.
4. In the “PPP” pane, make sure “Account Name” and “Password” are blank, and that “Telephone Number” is #777.
5. In the “Bluetooth Modem” pane, make sure the Modem dropdown says “Sprint PCS Vision”, and (optionally) check all checkboxes. Now you’re ready to connect to the internet.
6. Go back to the “PPP” pane, and click “Dial Now…” An “Internet Connect” dialog box will appear. Make sure the Bluetooth pane is showing. [screenshot]
7. Click “Connect”. The modem status in the menu bar will read “Connecting…” and your phone will say “Connected as data modem to [your computer name]“. You are connected! A timer on the phone will show the duration of your connection.
8. Open a web browser on your computer to confirm that you are connected.
Share your internet connection via AirPort
Now you are ready to share your connection to the internet with other users. To do so:
1. Turn AirPort back on if you turned it off earlier.
2. Return to System Preferences. (Click “Show All” if you are still on your Network settings.)
3. In “Internet & Network”, click “Sharing”.
4. Go to “Internet” pane. [screenshot]
5. In the dropdown labeled “Share your connection from”, select “Bluetooth”.
6. In the “To computers using” area, select “AirPort”.
7. Click “AirPort options” to make sure encryption is not turned on and/or to change the name of the access point (SSID) that your Mac will broadcast .
8. Click “Start” to start sharing your internet connection via wifi.
9. You may get a message saying this conflicts with your firewall setting, as Personal Web Sharing must be turned on (for some reason) to share your internet connection. If there’s a dialog, click “Show Services” or directly open the “Services” pane in Sharing (which partially controls your firewall), and activate “Personal Web Sharing” service. Note that this will make the “Sites” folder in your home directory available via your network connection. (If someone can explain to me why Personal Web Sharing has to be turned on in order to share your internet connection, I’d love to hear it. If it’s just to open the port, couldn’t they do that without firing up your web server?)
10. That’s it! You’re connected and you’re sharing your connection. You might want to test it with another wifi device to make sure it can connect. (By default, your Mac will broadcast its name as the the name of the access point (SSID)).
